Posted my first instructional video./Laptop screen replacement.

[angry_geek]

I absolutely hate being in front of any camera, so please excuse my poor showmanship. Thanks www.laptopscreen.com for the fast shipping and having it in stock.

I've been toying with the idea of posting instructional videos for various topics. Need to work on my technique and performance though. Anyway, here's my video. www.laptopscreen.com offered me a discount for doing this. It was just the motivation I needed.

http://youtu.be/P-jkJmUDL9I

 

[YeOldeStonecat]

Good stuff!

For the misc screw holder...here's an idea to draw traffic.
Have a blond, brunette, or red head....(or all 3) lay down on their back on a table next to you...in a bikini...and utilize pockets 'n cleavage on them (same parts you'd use for body shots) to hold those little screws!

 

[NYJimbo]

You know I gotta ask, but why did you disassemble that much of the computer when you should have just popped off the LCD bezel ?

 

[angry_geek]

Good stuff!

For the misc screw holder...here's an idea to draw traffic.
Have a blond, brunette, or red head....(or all 3) lay down on their back on a table next to you...in a bikini...and utilize pockets 'n cleavage on them (same parts you'd use for body shots) to hold those little screws!

Love this idea!

You know I gotta ask, but why did you disassemble that much of the computer when you should have just popped off the LCD bezel ?

Normally, I would do that. I usually take about 10 - 15 minutes to replace a screen. However, this was an instructional video. I wanted to show the entire process according to Dell's manual. This is also required to get the discount from laptop screen. It actually made it a bit easier to remove and replace the cabling on the back of the screen.

 

[tim fitzgerald]

Nice video!! I'm sure you will get more comfortable the more you do.

 

[angry_geek]

Yes, Jimbo, I saw that section too. However, having just dismantled this model today, I can assure you that you will have a difficult time replacing the screen if all you do is dismantle the bezel. You could get away with it if you have 4 hands and are able to juggle everything. However, there is also the alternative approach of doing it systematically, thereby making life just a bit easier. I do prefer the models that don't require much of a tear-down to get to the screen. This just isn't one of them. Not to mention, like I said earlier, I wanted to show the FULL process and meet the requirements of laptop screen in order to get the discount. Because I did the (nearly) full tear-down, the same tutorial can be used to replace a number of components.


Edit:

Nice video!! I'm sure you will get more comfortable the more you do.

Thank you sir!

 

[NYJimbo]

Yes, Jimbo, I saw that section too. However, having just dismantled this model today, I can assure you that you will have a difficult time replacing the screen if all you do is dismantle the bezel. You could get away with it if you have 4 hands and are able to juggle everything. However, there is also the alternative approach of doing it systematically, thereby making life just a bit easier. I do prefer the models that don't require much of a tear-down to get to the screen. This just isn't one of them. Not to mention, like I said earlier, I wanted to show the FULL process and meet the requirements of laptop screen in order to get the discount. Because I did the (nearly) full tear-down, the same tutorial can be used to replace a number of components.

Ok, I was just wondering because I think if John Doe wants to replace the LCD he's going to tear that much of the laptop down just to find he could have popped the bezel and unscrewed the LCD and popped it out. I've done that model before so I was not sure why you were going in that deep. If thats what laptopscreen.com wants then I guess they are showing the long way to do it.

 

[angry_geek]

Ok, I was just wondering because I think if John Doe wants to replace the LCD he's going to tear that much of the laptop down just to find he could have popped the bezel and unscrewed the LCD and popped it out. I've done that model before so I was not sure why you were going in that deep. If thats what laptopscreen.com wants then I guess they are showing the long way to do it.

Well, that's OK. We all have our process. If John Doe figures that out, I guess, bully for him. Though, I'm a little unsure of how easy it would be to support the screen with one hand while attempting to remove and reconnect cables and screws with the other on this particular model. I think on this one, I'll stick with being able to lay it down while working on it. But, if you prefer your method (again on this model), I would suggest you stick with it. Hopefully, we'll see your video on it.

 

[anonymous Mac Tech]

Well, that's OK. We all have our process. If John Doe figures that out, I guess, bully for him. Though, I'm a little unsure of how easy it would be to support the screen with one hand while attempting to remove and reconnect cables and screws with the other on this particular model. I think on this one, I'll stick with being able to lay it down while working on it. But, if you prefer your method (again on this model), I would suggest you stick with it. Hopefully, we'll see your video on it.

It literally only took 10 minutes for a nearly full teardown, even while explaining the whole process. I don't see the big deal even if there is an alternative easier way. Maybe, at the beginning mention something about an alternative way, then explain why you are taking a more scenic route. Other than that, the only thing I'd add is maybe using something like a small box for propping up the display assy while removing/reinstalling the hinge screws.

Very good for a first video.

 

[angry_geek]

It literally only took 10 minutes for a nearly full teardown, even while explaining the whole process. I don't see the big deal even if there is an alternative easier way. Maybe, at the beginning mention something about an alternative way, then explain why you are taking a more scenic route. Other than that, the only thing I'd add is maybe using something like a small box for propping up the display assy while removing/reinstalling the hinge screws.

Very good for a first video.

Good idea. I usually do that for larger screens. This is a little 14" model. Once you line up the hinges to the base, it almost supports itself while you put the screws back. I also need to find a quieter place to do these. I'm sure you heard the hen fest in the background. I had to pause the camera a few times to quiet them down, and, of course, my damn phone kept ringing. Real pain!

 

[16k_zx81]

Nah. Dont get the reason for lower chassis disassembly here. Could have been done without taking anything out but battery.

Jim

 

[LSB]

Great video!

He took the scenic route to make a good video

And it is true that some manuals direct to remove the display assembly first.

This is almost like the situation here:

http://youtu.be/FA-IfU6JlTE

versus here:

http://youtu.be/rBei2v9ce1M

I went the scenic route because I didn't think the other way was possible...

P.S. A short-cutted video would've been OK too OP
P.P.S Here's my favorite laptop video: http://youtu.be/wb4tKc3SAmc

 

[angry_geek]

Nah. Dont get the reason for lower chassis disassembly here. Could have been done without taking anything out but battery.

Jim

I explained this three times. I didn't want to do a short cut video, and, until now, didn't know that it would be ok for the discount. I still affirm that on this model, the disassembly made it easier. If anyone would like to post a shortcut video, I can't wait to watch it. If I ever need help with a shortcut disassembly, I'll be sure to post a different thread in a different section of the forum with a different OP and different title. Thanks for the advice, but, on this model, I'll stick to my method until someone actually has something that would encourage me to do it differently. By all means, for you guys telling us all how much easier this particular screen replacement could be, I encourage you to post your own tutorial.

 

[compnet]

Ya I'll third the method of pop the bezel, two top screws, pull the screen enough to get the side screws, Lcd cable, done. 90 seconds, 2 minutes tops. Could probably do it with one hand in 3 minutes - I might take you up on the offer for a tut next time I get a vostro like that

Thanks for the video.. I love making the same labor for plugging in a cable all the way after the DIY tech fails, or more when they break something.. "I bought a screen online, and they sent me a link go a video and said it was easy to do..."

 

[angry_geek]

Once again. I wanted to do the teardown video. I prefer having the display assembly out of the chassis on this model. Otherwise, it puts a considerable strain on the video cable, becomes difficult to juggle, you have to put down foam or something on the keyboard to prevent damaging the new screen when you plug in the cable. The 1540 is pretty much the same process which I learned 6 months ago when I replaced one of those using the shortcut method. I don't attempt to do the repair in 90 seconds; I would rather take my time. It's not a race. I'm not trying to compete with you guys or get advice on how to save 5 minutes on a screen replacement. I merely posted an instructional video. If you don't need it, then that's ok. It wasn't meant to teach people who already know how to do it. It was meant for those who don't.

 

[HFultzjr]

Once again. I wanted to do the teardown video. I prefer having the display assembly out of the chassis on this model. Otherwise, it puts a considerable strain on the video cable, becomes difficult to juggle, you have to put down foam or something on the keyboard to prevent damaging the new screen when you plug in the cable. The 1540 is pretty much the same process which I learned 6 months ago when I replaced one of those using the shortcut method. I don't attempt to do the repair in 90 seconds; I would rather take my time. It's not a race. I'm not trying to compete with you guys or get advice on how to save 5 minutes on a screen replacement. I merely posted an instructional video. If you don't need it, then that's ok. It wasn't meant to teach people who already know how to do it. It was meant for those who don't.

Loring,

Excellent video! Very informative. Looked very easy and non-destructive.
I think I could do one even with my shakey hands! LOL
Really liked the extra details shown with the longer take down process.

Hope to see more.

 

[TechKnights]

Thanks for taking the time to post something informative like this, its not often you get a real step by step tear down this clear.

 

[16k_zx81]

Once again. I wanted to do the teardown video. I prefer having the display assembly out of the chassis on this model. Otherwise, it puts a considerable strain on the video cable, becomes difficult to juggle, you have to put down foam or something on the keyboard to prevent damaging the new screen when you plug in the cable. The 1540 is pretty much the same process which I learned 6 months ago when I replaced one of those using the shortcut method. I don't attempt to do the repair in 90 seconds; I would rather take my time. It's not a race. I'm not trying to compete with you guys or get advice on how to save 5 minutes on a screen replacement. I merely posted an instructional video. If you don't need it, then that's ok. It wasn't meant to teach people who already know how to do it. It was meant for those who don't.

Dont get bent out of shape

People are just telling you the process is more complex than it probably needs to be.

Thats all.

Its just feedback, and this is your first instructional video.

.

 

[bertie40]

Good stuff!

For the misc screw holder...here's an idea to draw traffic.
Have a blond, brunette, or red head....(or all 3) lay down on their back on a table next to you...in a bikini...and utilize pockets 'n cleavage on them (same parts you'd use for body shots) to hold those little screws!

Ah. A kindred spirit.
Not forgetting to use body paint to indicate where the screws locate.

Q. why did you sack the redhead holding the laptop screen screws ?

A. Because she Torx too much.
(Sorry).

 

[HCHTech]

Ok, getting back on topic...

No offense to the OP, but it seems to me that we are shooting ourselves in the foot by posting instructional videos to Youtube, just to save $15 on a screen. What other skillsets do you feel comfortable detailing and publishing free of charge?