Another Important One
Another important steps I like to do, because I pretty much do all the above software/windows related tune up.
Make sure all Computers are blown out with air. (we get alot of dusty/dirty machines)
1. Visual inspection of motherboard for swollen capacitors, brown/darkish spots on Motherboard that could be leading to component failure.
2. Do the above to the power supply also. If out of warranty take cover off power supply, while if still in warranty, try to look through all the breather holes in the power supply.
3. Check all Fans CPU, GPU, PSU, CASE FAN. Lubricate all FANS if out of warranty. If still in warranty do all fans except PSU.
4. Clean all Contacts on Add-On Cards eg Graphics/Modems/Network Cards/Comms Cards etc. Then make sure all cards are firmly inserted and secure.
5. Clean all Contacts on RAM Modules. Then make sure all modules are firmly inserted and secure.
6. Clean old Heatsink paste / pads off CPU and heatsink. Apply a good quality brand name heat paste on. Can repeat process on Graphics cards.
7. Last one I see alot is physically clean the on/off switch at the front of computer cases. Lots and Lots of sticky buttons I have seen.
Another important steps I like to do, because I pretty much do all the above software/windows related tune up.
Make sure all Computers are blown out with air. (we get alot of dusty/dirty machines)
1. Visual inspection of motherboard for swollen capacitors, brown/darkish spots on Motherboard that could be leading to component failure.
2. Do the above to the power supply also. If out of warranty take cover off power supply, while if still in warranty, try to look through all the breather holes in the power supply.
3. Check all Fans CPU, GPU, PSU, CASE FAN. Lubricate all FANS if out of warranty. If still in warranty do all fans except PSU.
4. Clean all Contacts on Add-On Cards eg Graphics/Modems/Network Cards/Comms Cards etc. Then make sure all cards are firmly inserted and secure.
5. Clean all Contacts on RAM Modules. Then make sure all modules are firmly inserted and secure.
6. Clean old Heatsink paste / pads off CPU and heatsink. Apply a good quality brand name heat paste on. Can repeat process on Graphics cards.
7. Last one I see alot is physically clean the on/off switch at the front of computer cases. Lots and Lots of sticky buttons I have seen.