Dell Studio / POST / Keyboard / Battery

atlanticjim

Well-Known Member
Reaction score
36
Location
Long Island, New York
It must be ghosts ... Or a bad joke.

I'm refurbishing a Dell Studio 1555. Replaced the failing HD and updated to Win 10 and now have the oddest problem.

With the battery in it will get stuck at 3/4 POST and then require a combination of ESC and the ENTER key to proceed to the MS WIN 10 splash. All good from then on.

With the battery out, flea power discharged and on external power it will speed through the POST and load Windows but the KEYBOARD won't work. Touchpad will work fine.

Tried so far:
Dell onboard extended diagnostics. No errors.
BIOS set to default and saved.
Updated to the Win7 drivers although Dell will not claim they will work with Win 10.

I've ordered a new battery and hope that will solve it.

Any ideas?
 
And why do other people get all the interesting faults?

1. My method for testing with Linux was faulty. (Late in the day) I'll repeat it today more methodically.

2. I'm going to rollback to win 7 and see if it is solved.

3. I read a post about the SD card reader being a culprit so I removed it in device manager. Was not the problem. Am I wrong in thinking there might be a hardware addressing problem between the battery and the keyboard??

4. Give me your address and I'll pack it up!
 
If you are having problems with various OS, (Linux, Win, etc.), it looks like a hardware issue.
Motherboard
Bad "new" hard drive.
Ram
Etc.
 
If you are having problems with various OS, (Linux, Win, etc.), it looks like a hardware issue.
Motherboard
Bad "new" hard drive.
Ram
Etc.
It looks that way.

HD removed and I get the same issue.

Battery out = no keyboard input (F2 or F12)
Battery in = F12 works but not F2

Reseated the keyboard connector. No change in behavior.

Unable to Flash the BIOS "current BIOS is the same as the installed version".
 
Just for a long shot.....have you swapped the ram with know good ram?
Try slot1, then slot 2, then both, etc.
Could be ram or slot, try different configurations of ram.
 
Maybe flash to an older bios if you can just because. If you are on the verge of potential motherboard replacement anyway or a new machine, what do you have to lose?
 
Back
Top