Automatic Repair Black Screen - what might cause this, and cause it to recur?

britechguy

Well-Known Member
Reaction score
5,140
Location
Staunton, VA
I have a client who, at boot time, was receiving a black screen with the following text:
----
Automatic Repair

Automatic Repair couldn't repair your PC
Press "Advanced options" to try other options to repair your PC or "Shut down" to turn off your PC
Log File . . .
----

I have seen this before, and have typically had to resort to a fresh install of Windows to get past it, and did just that last December a couple of days after Christmas. Well, the client called up in arms today with precisely the same issue. I hasten to add that I am not being blamed. The statement is that everything has been working just perfectly since I fixed the machine in December 2025, but that this had just reared its ugly head again.

I do not know of anything that an end user can do that would trigger this occurrence, period. And I've never had an instance where it recurred.

I'm curious if others have insights into why it might recur and whether anything short of a clean install of Windows should be tried first prior to "the thermonuclear option." Part of me worries that I'll get this fixed, again, and after another 3 or 4 months, *surprise!*, it'll be back again.
 
I have a client who, at boot time, was receiving a black screen with the following text:
----
Automatic Repair

Automatic Repair couldn't repair your PC
Press "Advanced options" to try other options to repair your PC or "Shut down" to turn off your PC
Log File . . .
----

I have seen this before, and have typically had to resort to a fresh install of Windows to get past it, and did just that last December a couple of days after Christmas. Well, the client called up in arms today with precisely the same issue. I hasten to add that I am not being blamed. The statement is that everything has been working just perfectly since I fixed the machine in December 2025, but that this had just reared its ugly head again.

I do not know of anything that an end user can do that would trigger this occurrence, period. And I've never had an instance where it recurred.

I'm curious if others have insights into why it might recur and whether anything short of a clean install of Windows should be tried first prior to "the thermonuclear option." Part of me worries that I'll get this fixed, again, and after another 3 or 4 months, *surprise!*, it'll be back again.
I had a few of these recently on a couple of my own computers.
I switched off the machines for about 10 minutes, on restart everything was fine.
Didn't try to work out why 😏
One thing I also found was that Easeus Partition Master (don't know about all the other offerings out there) can sometimes repair boot failure corruptions, slaving the patient to the repairing machine though (haven't tried the USB stick boot option, suspect it should work).
 
Last edited:
This happened on my W11 daily driver a few months ago. I was not even able to repair it via booting from installation media. Had to nuke and pave. I think it started because I went several weeks with out turning it on. So no CMOS battery and built in battery ran down to zero.
 
Back
Top