uprighttech
Active Member
- Reaction score
- 30
- Location
- Kentucky
Certain HP laptops like the DV6 require you to remove the entire LCD assembly to replace the LCD because the two screws on the botton are too low to reach with a precision screw driver. So the entire top palm rest and keyboard have to come off before you can remove the bezel. Ridiculous.
If you have the right screw driver, you can get these out without removing the entire assembly. Took me a while to figure that out, but it's a much quicker and easier repair now. You're still going at the screw at a pretty good angle, but with a little pressure you can get it to turn.