[REQUEST] Information on fixing tablets,consoles and ipod/iphones

[Dameize]

Before I start this thread Id like to apologize as this is my third thread. I would like to note though that the other threads are irrelevant to this one.

Alright, so basically im wanting to know if anyone can give me some information and resources for learning how to fix tablet computers,consoles,ipods and iphones etc.

Ive had a look around the forum and cant seem to find any information, I did find the laptop section though.

ive also googled it but cant find much information either and I know there will probably not be any courses either.

Im thinking that specialising in tablets will win me a good market share in my area along with iphones and ipods.

Thanks in advance and again sorry if my posting is a bit excessive, this will probably be my last thread for a while.

 

[Encrypted Existence]

www.ifixit.com filler

 

[Dameize]

wow thanks, never knew that site existed but after looking at a few things on it it actually seems easy to follow...

Does anyone have any experience fixing something for the first time with these guides? most of it really does look like I could do it easily first time around I just want to be sure before advertising my services.

 

[Encrypted Existence]

I was thinking of getting into smartphone and tablet repair myself but I know that I need to practice first. I am going to get a broken Iphone from ebay and tear it down and get some practice putting it back together before I advertise the service. I purchased the pro tech base toolkit from ifixit and I am really impressed. I have been able to get some use out of the precision screw driver set (really just the bits) and the spudger or black stick or whatever it's called when fixing laptops. Youtube is an excellent source of knowledge for smartphone repair as well.

 

[phaZed]

The way I go about it..

"If somebody put it together, I can take it apart."

Take your time and go slow. You will get faster with experience.

 

[RichmondTech]

I always show how inefficient the manufacturer is by the number of spare parts I have after putting something back together.

 

[BryanLee]

I do a lot of iPhone/iPod repairs. The parts are pretty cheap so you can keep a decent amount of stock without much upfront cost. Also, you will want to keep that stop in case you break something in the process of repairing it. Some parts are very small and fragile.

Be prepared to do these repairs on the spot. In my experience people do not want to be without their phones and if you can do it now they will just go to someone who can. There are usually plenty of other options.

Things i keep on hand:

-Heat Gun (Be careful not to destroy anything with it)
-Eyeglass repair kit
-Spudger
-Spare parts for all of the various models
-Bright Light (makes it easier to deal with the tiny parts)
-Mat or something to catch dropped screws (they are hard to find once they hit the floor)

Note: Don't leave fingerprints on the inside of the screens when you replace them.

Another note: Make a point to try to get your hands on broken iPhones/iPods. These are great for spare parts or for fixing and reselling.

 

[YeOldeStonecat]

I always show how inefficient the manufacturer is by the number of spare parts I have after putting something back together.

LOL....yeah, "It's over-engineered!" is stated as you throw away the 7 remaining screws...

 

[Dameize]

To be honest with a guide itl probably be easy to do and after the first one or two ill probably be able to do it with no guidance its just getting the first couple of jobs where you can do them offsite.

By the way how much was the kit?

 

[madmodder]

i used to repair mobile phone, back in the days of the 3210, 3310, 8210 days. i never had any formal training on them i was just thrown in at the deep end, follow the guides and just take your time. The less rushing involved the less you break.

 

[Styxbound]

Having at this point fixed exactly one ipod, I'll try to pass on the benefit of this vast experience. Bought a screen for $12 without the frame, spent a lot of time trying to get the old frame off and failing completely, bought another whole rig with frame, pre-assembled, for $16. Installation time for this one was roughly 30 seconds. Have no idea how many other models this situation applies to, but certainly seems something to watch for.

 

[Dameize]

to be honest for the sake of $4 and now knowing what happened to you I would do it in all situations.