MacBook Pro Refusing to take a SSD

discipulus

Active Member
Reaction score
36
Location
Rockford, IL
Hey Guys,

So, got a clients system in and they wanted an upgrade to a SSD. Their drive has some minor flags in the SMART attributes, but no issues otherwise. I install the SSD and then attempt to install OS X. Fails. Attempt a clone. Fails. Drive test - SSD is performing sub optimally during a test. Replace the SSD. Having same issues with the new one. Drive passes long test and short test - SMART. Any ideas on how to make this computer take this drive? Mechanical drives work in the system just fine....
 
Ok, MBP's that can fit a SSD date back nearly 10 years. So maybe narrowing it down a bit by model or year might help. First thing that comes to mind is it's an old one and you may be using an SSD that cannot "dumb" down enough.
 
Perhaps the SATA data cable is bad (more likely if they want to upgrade because current HD is "slow")?

Edit: just read the last line, so probably not. But, I remember some Macs had this problem with data cables (maybe was MacBooks and not MacBook Pros?).
 
It's a Late 2011

EDIT: The technician that I work with who normally does the apple stuff says he's tried a different cable in it with the same results
 
Last edited:
2011 should not be an issue. I tossed a 500gb SSD into my 2010 13" MBP before I gave it to my daughter. And exactly how is the imaging, cloning, etc failing? Was Disk Utilities used to partition the drive first using GUID?
 
Alright, got an update - my install USB does not see the drive plugged into SATA at all, but it does see the drive when plugged into USB. Mechanical drives are being recognized by the installer when plugged into SATA. I can even boot from a mechanical drive. Any ideas?

Attempted CCC for the clone when the drive was plugged in USB. Clone said it was successful but drive failed to dismount after completion. Attempted Clonezilla - drive didn't boot, but I think now it's more because it's not seeing the SSD when it's plugged in SATA.
 
2011 should not be an issue. I tossed a 500gb SSD into my 2010 13" MBP before I gave it to my daughter. And exactly how is the imaging, cloning, etc failing? Was Disk Utilities used to partition the drive first using GUID?

I can also confirm that 2011 Macbook shouldn't be an issue as I recently did upgrade for business owner from platter to SSD. Used SuperDuper to backup and clone and that software worked great. First time doing this so I recommend this method. I do very few hardware "upgrades" these days because they can't be cost justified but....it's Apple so it was.
 
I have a SSD in my 2010 macbook pro. Works good. Strange! I have put them in Macbook Pro 2009 also.
 
With the exception of a mechanical drive working well, I would have voted for a bad cable. They fail all the time
 
Back
Top