HP Compaq 8200 Elite SFF and 1050TI card low profile

[lan101]

I'm seeing conflicting results when googling around on this. Does anyone know if the 1050TI will fit here?

I've read it fits but you can't put the side case piece back on (which my customer is actually ok with)

But another limiting factor I'm seeing is some say only 25w of power can come through that pci-e slot but then other sources are saying it can produce 75w.

http://shop.itema-pg.com/userfiles/editor/file/hp8200sff.pdf

page 22 of that link if I'm reading correctly makes me think it'll be fine at run ok with the stock power supply.

Just curious if anyone's had this combination before. Not a lot of power supply upgrade options either from what I'm seeing.

Thank you.

 

[Diggs]

You should be fine. I've done a couple in the HP equivalent (model 390/3010 SFF). Fit was very tight and covered a slot next to it but no issues.Card ran fine on stock power. The card only draws 30 watts.

 

[HCHTech]

I've read it fits but you can't put the side case piece back on

If this is so, then it doesn't really fit. Seriously, though if you don't have the side panel on, you have seriously changed the airflow and it isn't guaranteed that it will be "better". I would keep a close eye on temps for a while if I was going to do this.

 

[lan101]

If this is so, then it doesn't really fit. Seriously, though if you don't have the side panel on, you have seriously changed the airflow and it isn't guaranteed that it will be "better". I would keep a close eye on temps for a while if I was going to do this.

That's what I figured I'd do lol. I told him I'd want to keep it for at least a whole business day to see how it goes.