Windows 10 was always four partitions as best I can remember.I'm used to seeing Windows 10 install with 2 partitions. It's always a 500 MB "system" partition and then the remainder of the drive in the next partition. I'm doing a N&P with my same 1709 media on a blank drive and it insists on 4 partitions. Why the 4? What don't I understand?
View attachment 8530
Only if using UEFI. If you switch to legacy boot and then install Wintendo 10 you'll see the well known two partitions. On 1709 the first one is greater than 500 MiB, iirc.Windows 10 uses GPT partitioning scheme, so usually 4 but I have seen 5.
Only if using UEFI. If you switch to legacy boot and then install Wintendo 10 you'll see the well known two partitions. On 1709 the first one is greater than 500 MiB, iirc.
Hab the machine with the 5 partitions been preinstalled by the manufacturer? Then the 5th one may be a recovery partition.
Got an ACER laptop with 5 (or 6?) partitions sitting here.5 partitions, or more can be seen on EFI based OEM systems because the OEM can add their own partitions for various purposes, Dell has several systems that have a portion of the BIOS in one of these partitions. So you'll often see 5 partitions on Dell gear.
That's the transit partition. It's just there to keep the others in place during manufacture and delivery and it should have been removed before putting the machine into service. Isn't there a piece of yellow tape attached for easy removal?...and also 1 small partition with no size stated and no description.
There is a limit on gpt at 128 partitions that can't be exceeded even by OEMs. ;-)there's no limit on the partitions that an OEM can create
Hmmm.... so if I got a 10 TB drive I could have 128 Linux distro's in their own 80 GB partitions!There is a limit on gpt at 128 partitions that can't be exceeded even by OEMs. ;-)
Don't be scrooge, buy a bigger display instead of using a 5 inch one ;-)Make one hell of a boot menu?