Menaice
Member
- Reaction score
- 17
I have a build i am doing using a Corsair CX Series 650 Watt Bronze Certified Modular Power Supply. Setting it up with a 10tb storage drive to save motion recording from IP cameras.
At the time i didn't realize or notice this Western Digital 10TB Ultrastar - HUH721010ALE604 had
the PWDIS feature.
I know the motherboard can see the drive, i hooked the drive up in a USB 3.0 docking station and it spins up, was able to initialize the disk and create a GPT partition, Showed over 9TB.
Then i connected the drive via a sata cable tot he motherboard directly and powered it using the power supply for another sata to usb kit i had. Shows the disk in the BIOS and comes up in the OS.
I tried using a molex to sata connector but it didn't spin up. Waiting on some Kapton tape, but i did take some label maker tape and cut a small strip to cover up the 3rd pin. Still didn't spin up.
Any ideas? Honestly figured the molex to sata would fix the issue and spin up the drive but it won't.
At the time i didn't realize or notice this Western Digital 10TB Ultrastar - HUH721010ALE604 had
the PWDIS feature.
I know the motherboard can see the drive, i hooked the drive up in a USB 3.0 docking station and it spins up, was able to initialize the disk and create a GPT partition, Showed over 9TB.
Then i connected the drive via a sata cable tot he motherboard directly and powered it using the power supply for another sata to usb kit i had. Shows the disk in the BIOS and comes up in the OS.
I tried using a molex to sata connector but it didn't spin up. Waiting on some Kapton tape, but i did take some label maker tape and cut a small strip to cover up the 3rd pin. Still didn't spin up.
Any ideas? Honestly figured the molex to sata would fix the issue and spin up the drive but it won't.