Vista Standby Issue

[Tekguy]

I'm working on a Vista SP2 desktop that doesn't come out of standby properly. When you wake the pc a "usb devices not recognized" message pops up & it takes about 30 seconds before the keyboard or mouse start to work. The Windows noise for new usb devices found goes off several times while this is happening.

I installed all the newest drivers that MSI has on their website for this board & Windows is up to date so I'm not sure what is going on here.

 

[MLCS]

There's a lot more in depth power settings in Vista and 7. Go check them out, as I recall there's USB power settings, I would be willing to bet it's putting your USB's to sleep as well and so it's having to recognize everything plugged in again after wakeup.

 

[Tekguy]

"Allow the computer to turn off this device to save power" is unchecked for both the mouse & keyboard.

 

[brokenmachine]

In the computer's Bios, Change the ACPI Power setting from Auto or S1/S3 to S3, should fix your problem.

Give it a try,
Brokenmachine