What to do when we have no POST display PC computer?

To start we usually like a bit more information, like is it a desktop or laptop?
Does the PC still power on regardless of no post display?
What happens when you press the power button? Any fan noises, lights etc?
Can you access the BIOS to determine that any options to show a post screen/info is on?

We're a fickle lot and we like to be humored with all kinds of information whether trivial seeming or not.
Just like your doctor, the more you can describe your ailment the better we can diagnose your problem :)
 
I have a couple of POST cards I purchased back in the early 'aughts when I started my business. They sounded very useful, but I found that the incidence of issues they could detect was very low. I even used them to try and diagnose exactly what had failed on a couple of failed motherboards, as I recall, the codes weren't really helpful. I chalked it up at the time as pointing only to things someone doing board-level repair would care about and that wasn't me. They are gathering dust in my back cupboard as we speak.

I've had a couple of gaming motherboards in recently that had built in post displays, and that did lead to an RMA for one of them. It's hard for their warranty department to argue against their own tech showing a code for a failed RTC. I'm sure we'd have gotten an RMA without that, but the process would have taken longer.
 
Hi folks,

Just wonder what you do when there is no POST display when powering on the PC?

Welcome to share your experience and opinions.

Thanks.
It's certainly NOT using a POST test card. It's not 1999. PCs are cheap and easily replaced. If a barebones test and perhaps a quick swap of a PSU doesn't bring it back to life then it gets scragged. It's simply more economical to replace than spend lots of time trying to figure out what is wrong. The PSU is the most likely component to fail after that everything is integrated onto the motherboard so the only faulty component IS the motherboard, CPU, or memory. A quick swap of those components will lead you to the problem. There is no need for a POST card in modern computer repair.

Oh and spam alert! Paging @Kitten Kong
 
It's certainly NOT using a POST test card. It's not 1999. PCs are cheap and easily replaced. If a barebones test and perhaps a quick swap of a PSU doesn't bring it back to life then it gets scragged. It's simply more economical to replace than spend lots of time trying to figure out what is wrong. The PSU is the most likely component to fail after that everything is integrated onto the motherboard so the only faulty component IS the motherboard, CPU, or memory. A quick swap of those components will lead you to the problem. There is no need for a POST card in modern computer repair.

Oh and spam alert! Paging @Kitten Kong
You called??.

Hammer done. Thanks for the tag :)
 
Hi folks,

Just wonder what you do when there is no POST display when powering on the PC?

Welcome to share your experience and opinions.

Thanks.
@PcTestCard.com as a technician (yourself), you should know what to do, if there is no POST display. This is a end user type question.

If you are attempting to garner interest in your post test card (from a much earlier thread), then you will have to try a heck of a lot harder.

You are attempting to bypass our rules, for which action has been taken against your account.
 
Back
Top